Xilinx manufactures a wide range of Complex Programmable Logic Devices (CPLDs). Despite the complexity of the designs, the company has been able to come with unique device families that cater to the different CPLD needs of the consumers.
The Xilinx XC9536XL is a combination of high-performance and low-power usage. In this article, you will find out everything you need to know about it.
Introduction to the Xilinx XC9536XL CPLD
Generally, a Complex Programmable Logic Device (CPLD) is a device that combines a bank of macrocells with a fully programmable set of AND/OR arrays.
The goal is to streamline the process of programming logic devices, especially in the aspect of making sure the logic functions are implementable.
The Xilinx XC9536XL is a high-performance CPLD optimized for the highest performances and use cases needed.
Features of the Xilinx XC9536XL CPLD
The features of the Xilinx XC9536XL range from advanced system specifications and high-performance optimization.
Here are some of its features and the difference they make towards the configuration of the Xilinx XC9536XL CPLDs:
1. Individual Output
Xilinx XC9536XL enables individual output, thereby, enabling the excellent management and utilization of the pins.
To that end, the Input and Output (I/O) pins in the Xilinx XC9536XL can be configured individually.
2. High-Performance Operations
The Xilinx XC9536XL CPLD also has high-powered operations, thanks to the use of both the 2.5-volt and 3.3-volt output capabilities.
It also delivers higher performances via the advanced 0.35-micron feature size CMOS Fast FLASH™ technology and the 5-volt-tolerant I/O pins.
3. Enhanced System Reliability
The reliability of the Xilinx XC9536XL is boosted with the projected 20-year data retention capability. The CPLDs under this family also have an endurance exceeding 10,000 program/erase cycles.
4. Power Reduction Capabilities
The Xilinx XC9536XL CPLDs combine improved performance with power reduction to balance its performance.
In terms of the power reduction, it is basically to reduce excessive heat dissipation. To achieve this, it enables the individual configuration of each of the device’s macrocells for low-power mode.
Power reduction can also be done by making an automated software deactivation of the macrocells and unused product-terms in the devices.
Xilinx XC9536XL’s Buying Guide
Looking to buy the Xilinx XC9536XL high-performance CPLD? Here are some pro tips to help you make the best choice.
Check the Voltage and Power
Take the time to access the power and voltage of the Xilinx XC9536XL. The focus is to find out if its voltage matches the requirements of the project you have at hand. The voltage as used here refers to the voltage supply and the number of Input and Output (I/O) pins it has.
On the other hand, the power has to do with the device’s standby and dynamic power specifications.
Device Performance
It may be hard to judge the likely performance of the Xilinx XC9536XL from the surface. However, you want to use the Xilinx ISE WebPACK, a helpful tool that helps you get the right speed grade for the device.
Conclusion
The Xilinx XC9536XL CPLDs deliver higher performance. That notwithstanding, you can make the changes that matter the most, especially when you need low-power applications. All you have to do is to reconfigure each of the macrocells from the high-power/performance mode to the low-power mode.
EBICS can help you optimize the Xilinx XC9536XL for maximum productivity. Contact us today.
