Network cable and crystal head installation has always been one of the problems that plague us. After finding the right bulk network cable and crystal head and other accessories, how can we install them ourselves without relying on others? We start with 6 steps, prepare the tools and easily solve the connection problem in one step.
Here we take the example of super category 5 and category 6 crystal heads to introduce how to quickly perform the assembly.
1.Strip the sheath and shield according to the size shown in the drawing.
2.Fold the shield backward and cover the sheath; wind the ground wire around the shield for 1½ weeks and cut off the remaining wire
3.Unwind the twisted wires and arrange them in the desired order; cut the wires at an oblique angle (leaving the sharp corners), then insert them into the Load Bar and cut off the remaining wires.
4.Insert the fabricated cable into the crystal head.
5.Bend the end of the net along the wire to make it fit.
