LCD splicing screen with its high-definition ultra-wide viewing angle, non-stop operation, low energy consumption, long life and other advantages, popular indoor display screen market, widely used in monitoring command center, conference, teaching, exhibition hall, banks, shopping malls and many other occasions.
LCD splicing screen screen final presentation effect can not be separated from its own quality, of course, with the installation process also has a great relationship, today and share with you the LCD splicing screen in the installation process to pay attention to matters.
1、Choose the installation method according to the place and demand
According to different application sites, different installation methods can be used, currently the most common floor cabinet type, wall bracket type, embedded and vertical bracket these four types of installation methods.
Floor cabinet type is convenient for system movement; wall bracket type needs to consider the wall bearing; embedded space-saving and more beautiful; vertical bracket is convenient for later maintenance, but the ground solidity and bracket requirements are higher.
2, the installation surface should be flat, anti-static
No matter which installation method you choose, choose the installation surface should be flat, can load, because the whole system of LCD splicing screen whether in volume or in weight are relatively large.
In addition, the installation surface should be able to anti-static, to avoid affecting the quality of the picture rendering.
3, the installation environment light should be appropriate
The light around the installation environment should not be too strong, if it is too strong, it is possible that the screen can not be seen on the screen.
The light that may be coming in near the screen (such as windows), if necessary, should be blocked, while the lights are best turned off when the equipment is running, to ensure the normal operation of the equipment. Do not install lights directly in front of the screen, just install downlights.
4、Calculate the amount of wiring work in advance
According to the size and installation position of the screen of the whole project, calculate the length and specification of the various lines needed and calculate the need of the whole project.
In addition, when wiring, pay attention to distinguish its power lines and signal lines and install them in different places to avoid interference.
5、Reserve maintenance channel
In order to facilitate future maintenance, the need to set aside maintenance channels, now most of the project are used after the maintenance method, that is, in the back side of the large screen for maintenance, the need to leave enough maintenance channels in the back of the screen, generally need about 7 cm to 1 meter width, the construction space requirements are high.
6、Guarantee good ventilation of the equipment
In the maintenance channel, it is necessary to install air conditioning or air outlet to ensure good ventilation of the equipment.
The location of the air outlet should be as far away from the LCD splicing wall (about 1m better), and the air outlet wind can not blow directly against the box to avoid damage to the screen hot and cold unevenly.
7, frame edge design for removable
In order to future maintenance of the LCD splicing screen is more convenient, the frame edge must be removable edge. Outside the frame edge from the outside of the spelling wall on each side of the gap of about 25mm, large spelling wall should also be appropriate according to the number of columns to increase the margin.
In addition, in order to enter the box maintenance later, the maintenance channel is in principle not less than 1.2m wide. Removable side bar to press the edge of the screen 3-5mm is appropriate, in the box and screen completely installed in place, and then finally fixed removable side bar.
LCD splicing screen installation is not like ordinary display devices, just a simple put on the installation. The above is the splicing screen in the installation process needs to pay attention to matters, professional things to the professionals, it is recommended that you find professionals to install.
