Seamless LCD splicing screen four kinds of installation methods to share

Seamless LCD splicing screen is a common large screen display terminal products, mainly used in offices, conference rooms, exhibition halls, command centers and other occasions. So, next I will introduce you to the four types of seamless LCD splicing screen installation methods.

  Inset installation: Inset installation method is generally used in offices, conference rooms, exhibition halls, and is the case when the number of splicing units is not much, installed to the concave surface of the wall, and then wrapped, so that the large screen and the wall present a seamless visual effect, with a more beautiful installation effect.

Wall-mounted installation: wall-mounted installation method is a more common one, the advantages are quick installation, low cost, occupy less space, while not losing beauty, but this needs to be built on the basis of a load-bearing wall, but also need to take into account the safety factor, generally is the number of splicing units is not a lot of cases to use.

  Bracket installation: bracket installation method not only has a better load-bearing effect, the installation column for the hardware slide, you can achieve the panel and internal organization in any height adjustment; improve the efficiency of the installation and maintenance process, but in terms of aesthetics can be slightly worse.

  Cabinet type installation: TV wall cabinet type is a more high-end atmosphere, and the structure is strong, strong expression, using high-quality cold-rolled steel plate, laser cutting, CNC cutting, stamping, bending, robot welding, in government units, command center these applications are more popular.

  In the installation of seamless LCD splicing screen, often we will recommend suitable installation methods according to the specific installation environment, such as wall-mounted, cabinet type, welding bracket, double-layer aluminum profile, etc., each installation method also has its characteristics and requirements, such as wall-mounted best in 9 screen below, in order to facilitate later disassembly and maintenance, cabinet type is easy to install but need to reserve space for maintenance, in the location of narrow space if the wall Not a solid wall can be welded floor bracket plus front maintenance installation, etc.

 And in some occasions, in order to make the wall and seamless LCD splicing screen screen surface completely in a horizontal plane, it is necessary to embed the seamless LCD splicing screen into the wall body, how should this kind of installation, what aspects need to pay attention to?

  Embedded installation is mostly used in exhibition halls or conference rooms and other occasions, the purpose is to save the installation space and visual effect in depth, in general, to use embedded installation will need to design the size of seamless LCD splicing screen first, according to the number of splicing calculation to know, and then set aside the length and width, and need to leave 2 centimeters more space on each of the top, bottom, left and right four sides, in order to facilitate the installation of later technicians, after the installation is completed The extra part can be covered by using the decoration edge strip, which does not affect the overall effect.

  And in the embedded installation, the way to fix the seamless LCD splicing screen is generally double bracket for fixing, because this is more solid, through the expansion screws to fix the bracket on the side of the wall, and then the screen is fixed, it is necessary to pay attention to is to accurately calculate the depth before and after to keep the screen and the wall in the same level, because according to the size, the splicing gap is different, the thickness of the panel is not the same, and Is the LCD splicing screen whole or bare screen (seamless LCD splicing screen whole and bare screen difference), which also relates to the overall screen thickness, and these points we need to communicate in detail with the relevant LCD screen splicing manufacturer technical personnel before installation.

  And considering the maintenance of maintenance, if the wall can be maintained from behind, and if not, you need to add a front maintenance bracket to facilitate later maintenance. Another is the need to consider the layout and direction of signal lines and other wires, designed in advance to avoid damage to the decoration and aesthetics.

Leave a Reply

Your email address will not be published. Required fields are marked *