Everything You Need to Know About the Microchip MCP6001T-E/OT

Microchip is one of the leading manufacturers of Operating Amplifiers (Op-Amps). By design, these are Integrated Circuits (ICs) designed to “amplify” or bolster the operations of the circuit board.

In this article, you are going to find out what the Microchip MCP6001T-E/OT is all about and why it is important for your next electronic design.

What is the Microchip MCP6001T-E/OT All About?

It is an Operating Amplifier (Op-Amp) designed by Microchip to provide low-power, optimum performance for circuit board design.

According to the manufacturer, the Op-Amp can be used for a wide range of applications, including battery-powered systems, automotive products, and analog filters. The Op-Amp can also be used for portable equipment, PDAs, photodiode amplifiers, and notebooks.

Some of the popular electronic products can be produced with the Microchip MCP6001T-E/OT.

Technical Specifications of Microchip MCP6001T-E/OT

Let us talk about some of the technical specifications or attributes of the Microchip MCP6001T-E/OT. Here are some of them:

1. Number of Channels

Channels in Operating Amplifiers refer to the number of channels you are most likely going to find alongside nominal gain bandwidths in an Integrated Circuit (IC).

The Microchip MCP6001T-E/OT only has a channel.

2. Shutdown Status

A shutdown is a feature enabled in Operating Amplifiers (Op-Amps) to help the designer in conserving its battery. With this, the designer can manually turn on or off the Integrated Circuit (IC).

The Microchip MCP6001T-E/OT doesn’t have a shutdown feature. This may be detrimental to the successful power-saving status when the IC is used for more battery-powered applications.

3. Mounting Style

The Surface Mount Technology (SMT) is the underlying mounting concept being used by the Microchip MCP6001T-E/OT. It allows the components of the IC to be easily and faster placed atop the circuit board.

Other technical specifications of the Microchip MCP6001T-E/OT are represented in the table below:

Technical SpecificationsDescriptions
Power Supply Rejection Ratio (PSRR)86 dB
QualificationAEC-Q100
Slew Rate600 mV/us
Type of AmplifierLow-power Operating Amplifier (Op-Amp)
Operating Supply Current (OSC)100 uA
Minimum Supply Voltage1.8 volts
Maximum Supply Voltage5.5 volts
TechnologyCMOS
Height1.3mm
Input Bias Current (Ib)1 pA
Common Mode Rejection Ratio (CMRR)60 dB
Gain Bandwidth Product (GBP)1 MHz
Minimum Operating Temperature– 40 C
Maximum Operating Temperature+ 125 C
Input Noise Current Density0.0006 pA/sqrt Hz
Length4.1mm
Width1.8mm
Output Current per Channel23 mA
Voltage Gain dB112 dB

How to Buy the Microchip MCP6001T-E/OT

Are you interested in the Microchip MCP6001T-E/OT? Here is a buying guide to help you make the right decision:

1. What Type of Application Do You Need It for?

The Microchip MCP6001T-E/OT is a low-power Operating Temperature (Op-Amp). Although it aims to “step up” or improve on the weak signals sent by the electric wave, it might not do all that.

The low-power design of the Microchip MCP6001T-E/OT means that it should only be used for electronic applications requiring lower power.

2. Lead Time

Lead time is the number of days or weeks it will take to make a prototype or final design of the Microchip MCP6001T-E/OT. Rayming Technology (RayPCB) has an outstanding reputation for having one of the fastest lead times.

3. Cost

The cost of the Microchip MCP6001T-E/OT is in tandem with the number of pieces you are ordering. For lower costs, consider purchasing more of the ICs.

Conclusion

RayPCB is your go-to for designing the Microchip MCP6001T-E/OT. Contact us today!

Leave a Reply

Your email address will not be published.