Our Latest News

An introduction to open copper nose crimping

Whether in the electrical and electric industry, or automation industry, the use of copper nose is still very high. And pvc wire channel, terminal blocks and other electrical auxiliary materials with the use, bring good conductivity at the same time, but also the messy wiring organized standard, look more neat, the later maintenance is also very convenient. The following to share with you is OT open copper nose crimping some tips, I hope these tips can help you.

Full pcb manufacturing

1, open wire nose crimping need to be accurate tools, commonly used to crimping pliers, hydraulic pliers and electrical tape, etc., prepare two crimping tools because small specifications need to use crimping pliers, and large specifications need to use hydraulic pliers.

2, the outer skin of the cable wire stripped, using tools to remove the insulation layer wrapped around the outside of the wire, so that the crimped wire has a good conductivity.

3, the open copper nose set in the stripped cable, the middle if there is a vacancy, you need to use copper wire plug down, so as to ensure a good crimp tight.

4, the use of the same specifications of the crimping tool for pressing, the pressure needs to pay attention to the pressure to press the position, so as to ensure that the tight, after pressing the need to look again to see if the pressure is solid, after the pressure is wrapped in electrical tape on it.

These 4 points above are the opening copper nose crimping tips, it can also be said that the notes, you can pay attention to the process of crimping. Need to emphasize that when connecting high-power wires, to use hydraulic pliers to crimp the cable, so as to ensure that the crimping effect to avoid the problem of burning the cable because of the heat.

    GET A FREE QUOTE

    FPGA IC & FULL BOM LIST

    We'd love to

    hear from you

    Highlight multiple sections with this eye-catching call to action style.

      Contact Us

      Exhibition Bay South Squre, Fuhai Bao’an Shenzhen China

      • Sales@ebics.com
      • +86.755.27389663